Other than that it appears that there is one (soft) bad sector which is pretty good for a drive that old and used. No Errors 0001-0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Please try the request again. Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. check over here
Re-Test Drive 586 DRQ Timeout Data ReQuest Timeout. Several instances of information on data positioning and location could not be found. I don't really trust the drive because I already lost one file to it, and the drive seems unwilling to set the problem sectors aside. There are too many errors detected on this drive to be repaired. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
moon1 2011-03-15 13:38:52 UTC #11 any time;) acrufox 2011-03-21 15:34:54 UTC #12 Interesting. Replace Drive 570 No Recalibration Recalibration command failed. Retest after checking the connections. Replace the drive if the error repeats.
Check again in a view weeks and if those attribute values for 197 and 5 are still 1 and 0 or even 0 and 1 you should be okay. Re-Test Drive 121 Servo Error Servo error. and more errors won't crop up in the future?Click to expand... Western Digital Data Lifeguard Failure Checkpoint=97 Turns out DVD's don't work because the thing is so old it lacks a DVD player.
oxter 2011-08-08 12:47:11 UTC #4 What RMA you did? Western Digital Error Code 0007 Replace Drive 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9.
Replace the drive if the error repeats. Wd Rma Retest after checking the connections. Drive should be replaced. The drive should now be defect free.
SCT capabilities: (0x3037) SCT Status supported. http://www.tomshardware.com/forum/261338-32-dlgdiag-code-failed-read-test-element-failure The drive should now be defect free. Failed Read Test Element Failure Checkpoint 97 Replace Drive 161 RESET SIGNATURE The drive did not properly respond to test commands. Wd Error Codes Re-test Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting.
Check cabling and retest. check my blog Check cable and retest. Stay logged in Sign up now! Thanks, Roger -------------------------------------------- === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD5001AALS-00E3A0 Serial Number: WD-WCATR2850613 LU WWN Device Id: 5 0014ee 2afa8f8cb Read Element Failure
Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Retest after checking the connections. this content I do see that it failed some Short Self Tests about 250 powered on hours ago (2793).
Drive should be replaced. Hard Disk Sentinel Check cabling and retest. This may be due to a media error.
Check your connections and replace the cable. You may need to rescan to ensure that the repairs were effective. Check your floppy and retest. A second boot (Win XP restart) was normal; no error message.
lakedude Golden Member Joined: Mar 14, 2009 Messages: 1,621 Likes Received: 1 Got an old system that had a bad MB so I replaced the MB with a new one. There were too many errors found on this drive to be repaired. The drive may not have been accessed properly possibly due to a bad connection. http://discusswire.com/error-code/general-failure-server-should-provide-error-description-error-code-4.html Running %%860 on an out of support operating system is not an adequate solution to protect against threats.
Replace Drive 218 10+ SERVO Errors SERVO 10+. Version 4.12 for older drives and version 5.00 for current drives. The open file operation will fail with error -1032 (0xfffffbf8). Drive should be replaced.
This may be an anomaly or a defect with the drive. Register now!